Abstract

GaN-based ultraviolet-C (UVeC) light emitting diodes (LEDs) are of great interest for water disinfection. They offer significant advantages compared to conventional mercury lamps due to their compact form factor, low power requirements, high efficiency, non-toxicity, and overall robustness. However, despite the significant progress in the performance of semiconductor based UV LEDs that has been achieved in recent years, these devices still suffer from low emission power and relatively short lifetimes. Even the best UV LEDs exhibit external quantum efficiencies of only 1e2%. The objective of this study was to investigate the suitability of GaN-based UV LEDs for water disinfection. The investigation included the evaluation of the performance characteristics of UV LEDs at different operating conditions as well as the design of a UV LED module in view of the requirements for water treatment applications. Bioanalytical testing was conducted using Bacillus subtilis spores as test organism and UV LED modules with emission wavelengths of 269 nm and 282 nm. The results demonstrate the functionality of the developed UV LED disinfection modules. GaN-based UV LEDs effectively inactivated B. subtilis spores during static and flow-through tests applying varying water qualities. The 269 nm LEDs reached a higher level of inactivation than the 282 nm LEDs for the same applied fluence. The lower inactivation achieved by the 282 nm LEDs was compensated by their higher photon flux. First flow-through tests indicate a linear correlation between inactivation and fluence, demonstrating a well designed flow-through reactor. With improved light output and reduced costs, GaN-based UV LEDs can provide a promising alternative for decentralised and mobile water disinfection systems.

Abstract

This report presented recent developments in the field on the UV-LED disinfection. This technological field is very recent and further interests - along with rapid and continuing improvements in performance (especially in terms of emission power) - are expected within the next years. After the physical characterisation of the few UV-LEDs - at 269 and 282 nm - that are currently available on the market, their disinfecting action was to be measured via biodosimetric tests. They show an increase of the inactivationwith an increasing fluence using different types of raw water, although some early static tests tend to highlight potential recontamination and inhomogeneous distribution of UV-light - which may be explained by the module configuration. Main other results indicate that UV-absorbing compounds in the various waters reduce the disinfection capacity. Morevoer, a more effective disinfection is observed at 269 nm than at 282 nm for a similar fluence. However, the emission output is better with 282 nm - UV-LEDs. Therefore, an interesting aspect, worth being investigated in the future is to ensure an optimized configuration, which balances the input power, which is necessay to run the UV-LED module, and its disinfecting action. With potential enhanced emission powers, new developments for UV-LED water purification applications would enable to perform larger-scale tests and shorten UV exposure times.

Do you want to download “{filename}” {filesize}?

In order to optimally design and continuously improve our website for you, we use cookies. By continuing to use the website, you agree to the use of cookies. For more information on cookies, please see our privacy policy.